TRUGUARD Manual Call Point For Wireless Fire Alarm System

Installation details:

The manual call point can be mounted on the wall. There are 4 screw holes on the base. Diameter of the hole is 5mm. After mounted the base on the wall, connect the MCP to fire panel. Then press the remainder parts to the base. The cable for connecting to fire panel, 0.5mm2-1.5mm2 is recommended.

Indication:

There are 2 LEDs(green and red) at the top right corner of the MCP.

Normal operation: The green LED blinks about 1 time per second at 24VDC

Alarm: The red LED lights and green LED extinguished.

Reset:

At the left bottom corner, there is a L-shaped hole for reset. Push the key in, and then pull out, the reset is complete.

Specifications:

Working Voltage: 24VDC

Work Current:

Alarm Current:≤40uA @24VDC

≤50mA @24VDC

Contact Resistance:≤0.02 ohm

Working Conditions: Temp. –10~+65℃;

Humidity:10%-90% RH

Service life:10 years